Skip to main content

AEROSPACE

Multiaxial fabrics (NCFs) are born for the Aerospace and Aeronautical sectors, to provide the best mechanical performance to the part manufactured with composite materials.

Carbon fiber is most used fiber in the manufacturing of multiaxial fabrics for Aerospace Industry, due to its properties of stiffness and low density. Our high range of weights and the continuous improvements in our technology, related with several years of experience in multiaxial fabrics (NCFs) guarantee to our partners the best solutions for their application.

Advantages of SELCOM Multiaxial Non Crimp Fabrics (NCFs)

Mechanical Performance, Low Resin consumption

Full customization

Cost savings due to a faster layup

Full compatibility with different kind of resins

Product Customization

Selcom Multiaxial Non Crimp Fabrics (NCFs) are manufactured to meet the individual needs of our customers. All the fabrics can be based on the final application in order to deliver the expected performance.

Fiber orientation

Selcom Multiaxial Non Crimp Fabrics (NCFs) are made up of layers with parallel fibres laid in different orientations, stitched with texturized polyester yarn.
The
most commonly used Multiaxial - Non Crimp Fabrics (NCF) are oriented at ±45º or 0º-90º,but it's also possible to have ±30º or ±60º on request. The longitudinal direction of 0° is always the direction of the length of the roll and the stitching direction.

Drapeability

The parallel fibre layers are stitched with a texturized polyester yarn.
There can be different stitching types, depending on the final application. Our stitching patterns are Tricot, Pillar (Chain) or Pillar-Tricot.

Combined chopped strand mat or veil

All of our fabrics can be combined with additional layers of unwoven Veil from 10 to 100 g/m² or chopped strand MAT from 50 g/m² - 450 g/m².

Powder coating

On all the Selcom Multiaxial – Non Crimp Fabrics (NCFs) can be applied different dry thermoplastic powder, with the powder coating technology.

Adhesive

All the Selcom Multiaxial Non Crimp Fabrics (NCFs) can be finished with epoxy hot melt adhesive, to provide self-adhesive fabrics.

Fabric width - Roll lenght

Selcom Multiaxial Non Crimp Fabrics (NCFs) are produced in a standard width from 1270 mm (50 in) to 2540 mm (100 in) and can be cut in tapes, depending on customer's requests, without the fibres fall apart. Standard Roll length is 50 m but they can be produce on customer's need. We can produce up to 500 m roll length.

Fabric weight

Selcom Multiaxial Non Crimp Fabrics (NCFs) in Carbon Fibre range is from 50 g/m² to 1200 g/m².
Selcom Multiaxial Non Crimp Fabrics (NCFs) in Glass Fibre range is from 200 g/m² to 3000 g/m².

Multiaxial - Non Crimp Fabrics (NFCs) for Aerospace:

Biaxial

Carbon 

Fabrics

Triaxial Fabrics

Triaxial

Carbon

Fabrics

Quadriaxial Fabrics

Quadriaxial

Carbon

Fabrics