INDUSTRIAL

Industrial applications present huge potential use of multiaxial fabrics for the increasingly complex and demanding requirements of today’s developing market. SELCOM is well established in this industry that occupies about 30% of annual turnover of the company.

Some of the more important examples: stitched unidirectional fabrics for telephone poles construction, transversal unidirectional fabrics for high-pressure cylinders covers, heavy unidirectional fabrics made ​​for the construction of bridges, quadri-axial structural fabrics and woven fiberglass fabrics for tanks or reinforcing oil pipes, biaxial fabrics for body protection (ballistics), sound-dampening fabrics and structural heating fabrics.

Advantages of SELCOM Multiaxial – Non Crimp Fabrics (NCFs)

Mechanical Performance, Low Resin consumption

Full customization

Cost savings due to a faster layup

Full compatibility with different kind of resins

Product Customization

Selcom Multiaxial – Non Crimp Fabrics (NCFs) are manufacured to meet the individual needs of our customers. All the fabrics can be based on the final application in order to deliver the expected performance.

Fiber orientation

Selcom Multiaxial – Non Crimp Fabrics (NCFs) are made up of layers with parallel fibres laid in different orientations, stitched with texturized polyester yarn.
The most commonly used Multiaxial - Non Crimp Fabrics (NCF) are oriented at ±45º or 0º90º,but it’s also possible to have ±30º or ±60º on request. The longitudinal direction of 0° is always the direction of the length of the roll and the stitching direction.

Drapeability

The parallel fibre layers are stitched with a texturized polyester yarn.
There can be different stitching types, depending on the final application. Our stitching patterns are Tricot, Pillar (Chain) or Pillar-Tricot.

Combined chopped strand mat or veil

All of our fabrics can be combined with additional layers of unwoven Veil from 10 to 100 gr/M² or chopped strand MAT from 50 gr/M² - 450 gr/M².

Powder coating

On all the Selcom Multiaxial – Non Crimp Fabrics (NCFs) can be applied different dry thermoplastic powder, with the powder coating technology.

Adhesive

All the Selcom Multiaxial – Non Crimp Fabrics (NCFs) can be finished with epoxy hot melt adhesive, to provide self-adhesive fabrics.

Fabric width - Roll lenght

Selcom Multiaxial – Non Crimp Fabrics (NCFs) are produced in a standard width from 1270mm (50”) to 2540 mm (100”) and can be cut in tapes, depending on customer’s requests, without the fibres fall apart.
Standard Roll length is 50LM but they can be produce on customer’s need. We can produce up to 500 LM roll length.

Fabric weight

Selcom Multiaxial – Non Crimp Fabrics (NCFs) in Carbon Fibre range is from 50 gr/M² to 1200 gr/M².
Selcom Multiaxial – Non Crimp Fabrics (NCFs) in Glass Fibre range is from 200 gr/M² to 3000 gr/M².

Multiaxial - Non Crimp Fabrics (NFCs) for Industrial:

Biaxial

Carbon 

Fabrics

Uniaxial Fabrics

Unidirectional

Carbon

Fabrics

Biaxial Fabrics E-Glass

“E” Glass

Biaxial

Fabrics

Quadriaxial Fabrics

“E” Glass

Quadriaxial

Fabrics