Skip to main content

WIND

The clean energy sector is increasing. SELCOM provides a wide range of structural fabrics for the construction of wind turbines.
The production of blades and other important structural elements (by assembling dry fabrics with polymeric composite materials) for the wind energy sector is the most commonly consumed in the world of multiaxial fabrics that are essential for the best performance and practically irreplaceable.

Furthermore, Selcom team use the best possible compatibility with polymeric composite materials used by our customers.
Contributing in renewable energy is a goal that SELCOM arises from recent years. Supporting clean energy, derived from the use of natural materials inexhaustible, is an important step to help not only customers but also the environment around us.

Advantages of SELCOM Multiaxial Non Crimp Fabrics (NCFs)

Mechanical Performance, Low Resin consumption

Full customization

Cost savings due to a faster layup

Full compatibility with different kind of resins

Product Customization

Selcom Multiaxial Non Crimp Fabrics (NCFs) are manufactured to meet the individual needs of our customers. All the fabrics can be based on the final application in order to deliver the expected performance.

Fiber orientation

Selcom Multiaxial Non Crimp Fabrics (NCFs) are made up of layers with parallel fibres laid in different orientations, stitched with texturized polyester yarn.
The most commonly used Multiaxial - Non Crimp Fabrics (NCF) are oriented at ±45º or 0º-90º,but it's also possible to have ±30º or ±60º on request. The longitudinal direction of 0° is always the direction of the length of the roll and the stitching direction.

Drapeability

The parallel fibre layers are stitched with a texturized polyester yarn.
There can be different stitching types, depending on the final application. Our stitching patterns are Tricot, Pillar (Chain) or Pillar-Tricot.

Combined chopped strand mat or veil

All of our fabrics can be combined with additional layers of unwoven Veil from 10 to 100 g/m² or chopped strand MAT from 50 g/m² - 450 g/m².

Powder coating

On all the Selcom Multiaxial Non Crimp Fabrics (NCFs) can be applied different dry thermoplastic powder, with the powder coating technolog

Adhesive

All the Selcom Multiaxial Non Crimp Fabrics (NCFs) can be finished with epoxy hot melt adhesive, to provide self-adhesive fabrics.

Fabric width - Roll lenght

Selcom Multiaxial Non Crimp Fabrics (NCFs) are produced in a standard width from 1270mm (50 inch) to 2540 mm (100 inch) and can be cut in tapes, depending on customer's requests, without the fibres fall apart.
Standard Roll length is 50 m but they can be produce on customer's need. We can produce up to 500 m roll length.

Fabric weight

Selcom Multiaxial Non Crimp Fabrics (NCFs) in Carbon Fibre range is from 50 g/m² to 1200 g/m².
Selcom Multiaxial Non Crimp Fabrics (NCFs) in Glass Fibre range is from 200 g/m² to 3000 g/m².

Multiaxial - Non Crimp Fabrics (NFCs) for Wind Energy:

Biaxial

Carbon 

Fabrics

Uniaxial Fabrics

Unidirectional

Carbon

Fabrics

Biaxial Fabrics E-Glass

“E” Glass

Biaxial

Fabrics

Triaxial Fabrics

“E” Glass

Triaxial

Fabrics