Skip to main content

CARBON FIBER OPEN MESHES

Woven Unidirectional Fabrics

Open meshes in Carbon Fiber have a classic construction 0º-90º warp-weft. They’re used for the structural reinforcement of concrete, prestressed, masonry, steel and wood.

The meshes are thermofixed with glass fiber coated with thermoplastic materials to provide stability with cutting and handling. Open meshes in Carbon Fiber are produced in a standard width of 1000mm, and can be cut at desired width. Currently the production range of open meshes in carbon fiber goes from 170 g/m² to 300 g/m².

 
 
 
1
1

Resin Compatibility

Carbon fibers used for the production of our multiaxial non crimp fabrics are coated with a broad range of sizing to provide compatibility with multiple resin systems.

Unsaturated_Polyester Icon

Unsaturated polyester

Vynilester Icon

Vinylester

Epoxy Icon

Epoxy

Polyurethane Icon

Polyurethane

Polypropilene Icon

Polypropilene

Product Customization

Selcom Multiaxial Non Crimp Fabrics (NCFs) are manufacured to meet the individual needs of our customers. All the fabrics can be based on the final application in order to deliver the expected performance.

Fiber orientation

Selcom Multiaxial Non Crimp Fabrics (NCFs) are made up of layers with parallel fibres laid in different orientations, stitched with texturized polyester yarn.
The most commonly used Multiaxial - Non Crimp Fabrics (NCF) are oriented at ±45º or 0º-90º,but it's also possible to have ±30º or ±60º on request. The longitudinal direction of 0° is always the direction of the length of the roll and the stitching direction.

Drapeability

The parallel fibre layers are stitched with a texturized polyester yarn.
There can be different stitching types, depending on the final application. Our stitching patterns are Tricot, Pillar (Chain) or Pillar-Tricot.

Combined chopped strand mat or veil

All of our fabrics can be combined with additional layers of unwoven Veil from 10 to 100 g/m² or chopped strand MAT from 50 g/m² - 450 g/m².

Powder coating

On all the Selcom Multiaxial Non Crimp Fabrics (NCFs) can be applied different dry thermoplastic powder, with the powder coating technology

Adhesive

Adhesive

All the Selcom Multiaxial Non Crimp Fabrics (NCFs) can be finished with epoxy hot melt adhesive, to provide self-adhesive fabrics.

Fabric width - Roll lenght

Selcom Multiaxial Non Crimp Fabrics (NCFs) are produced in a standard width from 1270 mm (50 in) to 2540 mm (100 in) and can be cut in tapes, depending on customer's requests, without the fibres fall apart. Standard Roll length is 50 m but they can be produce on customer's need. We can produce up to 500 m roll length.

Fabric weight

Selcom Multiaxial Non Crimp Fabrics (NCFs) in Carbon Fibre range is from 50 g/m² to 1200 g/m².
Selcom Multiaxial Non Crimp Fabrics (NCFs) in Glass Fibre range is from 200 g/m² to 3000 g/m².

Woven Mesh Fabrics are typically used in:

Civil Engineering Icon

CIVIL

ENGINEERING