MULTIAXIAL - NON CRIMP FABRICS (NCFs)

FROM GLASS CARBON AND OTHER FABRICS

SELCOM is a leading company that specializes in the manufacturing of multiaxial fabrics (also known as NON CRIMP FABRICS NCFs) made of high performance fibres such as carbon, aramid, glass, basalt and others to serve the Composites Industry. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved.

SELCOM Multiaxial – Non Crimp Fabrics (NCFs) are suitable for: vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

Advantages of SELCOM Multiaxial – Non Crimp Fabrics (NCFs)

Mechanical Performance, Low Resin consumption

Full customisation

Cost savings due to a faster layup

Full compatibility with different kind of resins

Product Customization

Selcom Multiaxial – Non Crimp Fabrics (NCFs) are manufacured to meet the individual needs of our customers. All the fabrics can be based on the final application in order to deliver the expected performance.

Fiber orientation

Selcom Multiaxial – Non Crimp Fabrics (NCFs) are made up of layers with parallel fibres laid in different orientations, stitched with texturized polyester yarn.
The most commonly used Multiaxial - Non Crimp Fabrics (NCF) are oriented at ±45º or 0º90º,but it’s also possible to have ±30º or ±60º on request. The longitudinal direction of 0° is always the direction of the length of the roll and the stitching direction.

Drapeability

The parallel fibre layers are stitched with a texturized polyester yarn.
There can be different stitching types, depending on the final application. Our stitching patterns are Tricot, Pillar (Chain) or Pillar-Tricot.

Combined chopped strand mat or veil

All of our fabrics can be combined with additional layers of unwoven Veil from 10 to 100 gr/M² or chopped strand MAT from 50 gr/M² - 450 gr/M².

Powder coating

On all the Selcom Multiaxial – Non Crimp Fabrics (NCFs) can be applied different dry thermoplastic powder, with the powder coating technolog

Adhesive

All the Selcom Multiaxial – Non Crimp Fabrics (NCFs) can be finished with epoxy hot melt adhesive, to provide self-adhesive fabrics.

Fabric width - Roll lenght

Selcom Multiaxial – Non Crimp Fabrics (NCFs) are produced in a standard width from 1270mm (50”) to 2540 mm (100”) and can be cut in tapes, depending on customer’s requests, without the fibres fall apart.
Standard Roll length is 50LM but they can be produce on customer’s need. We can produce up to 500 LM roll length.

Fabric weight

Selcom Multiaxial – Non Crimp Fabrics (NCFs) in Carbon Fibre range is from 50 gr/M² to 1200 gr/M².
Selcom Multiaxial – Non Crimp Fabrics (NCFs) in Glass Fibre range is from 200 gr/M² to 3000 gr/M².

CARBON MULTIAXIALS - NON CRIMP FABRICS (NCFs)

BROCHURE DOWNLOAD

Biaxial Fabrics

Uniaxial Fabrics

Unidirectional Fabrics

Triaxial Fabrics

Triaxial Fabrics

Quadriaxial Fabrics

Quadriaxial Fabrics

"E" GLASS MULTIAXIALS - NON CRIMP FABRICS (NCFs)

BROCHURE DOWNLOAD
Biaxial Fabrics E-Glass

Biaxial Fabrics

Uniaxial Fabrics E-Glass

Unidirectional Fabrics

Triaxial Fabrics E-Glass

Triaxial Fabrics

Quadriaxial Fabrics

Quadriaxial Fabrics

WOVEN TAPES AND MESH FABRICS

BROCHURE DOWNLOAD
Woven Tape

Woven Tapes

Woven Unidirectional Fabrics

Mesh Fabrics

TAILOR MADE FABRICS

Our wide range of glass and carbon fabrics are manufactured according to the specific requirements of our customers and reflects their needs in order to provide the best possible performance. We provide the full technical support to find the best solution for your needs.